Material | High Borosilicate glass |
Specification | 100ml-1000ml |
Description/Packaging | 1 pcs/box |
Instructions
Wash the bottle. According to the need to wash certain gas impurities during the analysis test, put the required gas cleaning liquid (such as pyrogallic acid, sulfuric acid) into the bottle body, then fit the bottle stopper with the bottle body, and then use it to analyze the test. The device is turned on, and the gas is introduced into the bottle from the air inlet pipe (the gas is introduced into the Montessori washing bottle, and it is sprayed out from the small hole at the end of the air inlet pipe to disperse the gas into small bubbles and overflow upward; the gas is introduced into the Tessellated washing bottle Then it is sprayed out from the tail end of the air inlet pipe. After the impact of the flat bottom, the gas is dispersed into fine bubbles and overflows upward). The sprayed fine bubbles are washed by the deep washing liquid in the bottle, and then released from another branch of the pipe. When used, if it is washed once If the requirements of the analysis test cannot be met, you can connect another gas washing bottle with different washing liquids in the bottle. Use the above principles and methods to continuously wash until the gas washing meets the requirements of the analysis test.
