Availability: | |
---|---|
Quantity: | |
Features:
1. Using PID microcomputer intelligent temperature controller, the temperature control is precise and high; the large-screen LCD screen can simultaneously display time, temperature and icons such as refrigeration, heating, and alarm.
2. The inner tank is made of 304 stainless steel, and the studio is equipped with shelves whose height and quantity can be adjusted arbitrarily.
3. Independent temperature limit system: It has the function of sound and light alarm for low temperature, high temperature, and the maximum limit of 70 degrees, and stops the running program to ensure the safe operation of the experiment without accidents.
4. Environmental protection and energy saving: The insulation layer is integrally infused with rigid polyurethane, which is strong, durable, efficient and energy-saving.
5. Timing function: It is convenient to observe the culture time, and the timing time can be set from 0 to 9999 minutes.
6. Brand compressor: Using environmentally friendly fluorine-free refrigerant (R134a), high efficiency, low energy consumption, energy saving and environmental protection.
7. A 30mm test hole is reserved on the side of the box to facilitate experimental operation and temperature measurement.
8. There is an observation window on the outer door, allowing you to directly observe the culture conditions in the studio.
9. Equipped with a UV disinfection system to effectively eliminate residual bacteria during the experiment.
10.II series is cultured with humidity, and the humidity display accuracy is: 0.1%RH.
Technical Parameters:
Model | MJ-500-I | MJ-800-I | MJ-1000-I | MJ-1200-I | MJ-1500-I | |||||
MJ-500-II | MJ-800-II | MJ-1000-II | MJ-1200-II | MJ-1500-II | ||||||
Capacity(L) | 500 | 800 | 1000L | 1200L | 1500L | |||||
Temperature(℃) | Control range | 5~65 | ||||||||
Resolution | 0.1 | |||||||||
Volatility | ±0.8 | ±0.8 | ±0.8 | ±1 | ±1 | |||||
Evenness | ±1 | ±1 | ±1 | ±1.2 | ±1.2 | |||||
Humidity(%RH) | Control range | 50~90%(Type I without humidity, Type II with humidity) | ||||||||
Resolution | 0.1% | |||||||||
Volatility | ±5 | |||||||||
Power (W) | 650 | 650 | 650 | 970 | 970 | |||||
680 | 680 | 720 | 1030 | 1030 | ||||||
Power supply | 220VAC 50HZ | |||||||||
Inner box size (cm) | 110×50×100 | 120×58×110 | 120×68×115 | 183×58×110 | 183×68×115 | |||||
Carton size (cm) | 117×63×165 | 128×70×170 | 128×88×177 | 188×70×170 | 188×85×177 | |||||
Carrying bracket | 6 | 8 | 10 | 12 | 15 |
Remarks:
1. Model-I is without humidity control, model-II is with humidity control, and comes standard with a humidifier.
2. The mold incubator is equipped with a disinfection system as standard
3. The performance parameter test under no-load conditions is: ambient temperature 20℃, ambient humidity 50%RH
Optional accessories:
1.USB data interface
2.Printer
3.RS-485 computer communication interface
4. Paperless recorder
5. Internal socket
6. Fresh air function
7. Low temperature customization (stable operation for a long time below 5 degrees)
8.Remote alarm function
Features:
1. Using PID microcomputer intelligent temperature controller, the temperature control is precise and high; the large-screen LCD screen can simultaneously display time, temperature and icons such as refrigeration, heating, and alarm.
2. The inner tank is made of 304 stainless steel, and the studio is equipped with shelves whose height and quantity can be adjusted arbitrarily.
3. Independent temperature limit system: It has the function of sound and light alarm for low temperature, high temperature, and the maximum limit of 70 degrees, and stops the running program to ensure the safe operation of the experiment without accidents.
4. Environmental protection and energy saving: The insulation layer is integrally infused with rigid polyurethane, which is strong, durable, efficient and energy-saving.
5. Timing function: It is convenient to observe the culture time, and the timing time can be set from 0 to 9999 minutes.
6. Brand compressor: Using environmentally friendly fluorine-free refrigerant (R134a), high efficiency, low energy consumption, energy saving and environmental protection.
7. A 30mm test hole is reserved on the side of the box to facilitate experimental operation and temperature measurement.
8. There is an observation window on the outer door, allowing you to directly observe the culture conditions in the studio.
9. Equipped with a UV disinfection system to effectively eliminate residual bacteria during the experiment.
10.II series is cultured with humidity, and the humidity display accuracy is: 0.1%RH.
Technical Parameters:
Model | MJ-500-I | MJ-800-I | MJ-1000-I | MJ-1200-I | MJ-1500-I | |||||
MJ-500-II | MJ-800-II | MJ-1000-II | MJ-1200-II | MJ-1500-II | ||||||
Capacity(L) | 500 | 800 | 1000L | 1200L | 1500L | |||||
Temperature(℃) | Control range | 5~65 | ||||||||
Resolution | 0.1 | |||||||||
Volatility | ±0.8 | ±0.8 | ±0.8 | ±1 | ±1 | |||||
Evenness | ±1 | ±1 | ±1 | ±1.2 | ±1.2 | |||||
Humidity(%RH) | Control range | 50~90%(Type I without humidity, Type II with humidity) | ||||||||
Resolution | 0.1% | |||||||||
Volatility | ±5 | |||||||||
Power (W) | 650 | 650 | 650 | 970 | 970 | |||||
680 | 680 | 720 | 1030 | 1030 | ||||||
Power supply | 220VAC 50HZ | |||||||||
Inner box size (cm) | 110×50×100 | 120×58×110 | 120×68×115 | 183×58×110 | 183×68×115 | |||||
Carton size (cm) | 117×63×165 | 128×70×170 | 128×88×177 | 188×70×170 | 188×85×177 | |||||
Carrying bracket | 6 | 8 | 10 | 12 | 15 |
Remarks:
1. Model-I is without humidity control, model-II is with humidity control, and comes standard with a humidifier.
2. The mold incubator is equipped with a disinfection system as standard
3. The performance parameter test under no-load conditions is: ambient temperature 20℃, ambient humidity 50%RH
Optional accessories:
1.USB data interface
2.Printer
3.RS-485 computer communication interface
4. Paperless recorder
5. Internal socket
6. Fresh air function
7. Low temperature customization (stable operation for a long time below 5 degrees)
8.Remote alarm function