Product Code | Specification | Technical Parameters | Packing` |
W-022701 | 25ul | Valve type | 1 piece/box |
W-022702 | 50ul |
W-022703 | 100ul |
W-022704 | 250ul |
W-022705 | 500ul |
W-022706 | lml |
W-022707 | 2.5ml |
W-022708 | 5ml |
W-022709 | 10ml |
W-022710 | 25ml |
W-022711 | 50ml |
W-022712 | 100ml |
Instructions
1. Avoid washing with strong acid and alkali solutions to prevent the glass from being corroded and losing weight, and the stainless steel parts to be corroded and damaged, causing air and water leakage.
2. The sampler should be immersed in the solution and pulled several times before use to drain the air bubbles in the needle tip. Otherwise, the accuracy of analysis and volume accuracy will be affected. It should be cleaned immediately after use to prevent the core from being damaged. The dirt is stuck or the needle tip is clogged.
3. The capacity indicator core should not be pulled beyond the trademark pattern. If it is accidentally pulled out, it should be inserted patiently to prevent the stainless steel wire from bending.
4. The needle tip of this injector should not be burned with fire to prevent the needle tip from annealing and losing its penetration.
