Features:
GENERAL FEATURES
· High resolution LCD display, 5.7 inches.
· Multi-reading feature allows auto-read, timed-read and continuous-read.
· Automatic/Manual temperature compensation ensures accurate results.
· Auto-hold feature senses and locks the measurement endpoint.
· Data Storage 500 sets (GLP-compliant).
· Support for USB or RS-232 communication.
· Reset feature automatically resumes all settings back to factory default options.
· IP54 waterproof.
pH
· 1-5 points calibration with Standard Recognition.
· Selectable pH buffer groups, including NIST, DIN, GB.
· Automatic electrode diagnosis with pH slope and offset display.
Ion
· 1-5 points calibration.
· Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, PX, etc.
· Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode.
· Over 10 methods are built-in, including F-, Cl-, Br-, I-, NO3-, BF4-, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+ and etc., user-defined method is supported.
Conductivity
· 1-3 points calibration with Standard Recognition.
· Settable parameters, including cell constant, temperature compensation coefficient and TDS factor.
· Temperature compensation type (none, linear, pure water).
DO
· Support for air-saturated water or zero oxygen calibration.
· Auto barometric pressure compensation
· Manual Salinity Factor Correction
· Selectable pressure unit, including kPa, mbar, Torr, Atm.
Includes
· E-301-QC 3 in 1 pH composite electrode
· DJS-1VTC EC electrode
· DO-958-Q polarographic DO electrode
· NIST pH standard solution(4.01, 7.00, 10.01) ,50ml/vial
· 1413μS/cm EC standard solution, 50ml, 1 vial
· REX-5 electrode stand
Specifications:
Model | M300F | |
Parameters | pH/EC/ISE/DO/Temp. (mV/ORP/pX/Resistivity/TDS/Sal./DO Saturation) | |
pH | Range | -2.00 to 20.00pH |
Resolution | 0.1, 0.01 pH | |
Accuracy | ±0.01 pH | |
Calibration Points | Up to 5 | |
Standard Customization | Yes | |
Standard Recognition | NIST, GB, USA and DIN buffers | |
Slope Limit | Yes | |
mV | Range | -2000.0 to 2000.0 mV |
Resolution | 0.1 mV | |
Accuracy | ±0.3 mV or ±0.1% | |
pX | Range | -2.00 to 20.00 pX |
Resolution | 0.1, 0.01 pX | |
Accuracy | ±0.01 pX | |
Calibration Points | Up to 5 | |
ISE | Range | 1.000e-9 to 9.999e+9 |
Unit | mol/L, mmol/L, g/L, mg/L, μg/L, ppm, ppb | |
Resolution | Up to 4 significant digits | |
Accuracy | ±0.5% | |
Calibration Points | Up to 5 | |
Conductivity | Range | 0.000 μS/cm to 1000 mS/cm |
Resolution | 0.001 μS/cm minimum, various with range selection | |
Accuracy | ±1.0% FS | |
Reference Temperature | 20, 25 ºC | |
Calibration Points | Up to 3 | |
Standard Recognition | 84μS/cm, 1413μS/cm, 12.88mS/cm | |
Resistivity | Range | 5.00 Ω·cm~20.00 MΩ·cm |
Resolution | 0.01 Ω·cm minimum | |
Accuracy | ±1.0% FS | |
TDS | Range | 0.00 ppm~300 ppt |
Resolution | 0.01mg/L minimum, various with range selection | |
Accuracy | ±1.0% FS | |
Salinity | Range | 0.0~80.0 ppt |
Resolution | 0.1ppt | |
Accuracy | ±2ppt | |
Dissolved Oxygen Concentration | Range | 0.00 to 20.00 ppm |
Resolution | 0.01 ppm | |
Accuracy | ±0.10 ppm | |
Calibration Points | Air-saturated water or zero point | |
Barometric Compensation | Yes | |
Manual Salinity Factor Correction | Yes | |
Saturation | Range | (0.0 to 200.0)% |
Resolution | 0.1% | |
Accuracy | ±2.0% | |
Temperature | Range | -5 to 110 ºC, 23 to 230 ºF |
Unit | ºC, ºF | |
Resolution | 0.1 | |
Accuracy | ±0.2ºC | |
Measurement | Reading Mode | Auto Read (Fast, Medium, Slow), Timed, Continuous |
Reading Prompts | Reading, Stable, Locked | |
Temp. Compensation | ATC, MTC | |
Data management | Data Storage | 500 results each |
GLP Features | Yes | |
Inputs | pH Electrode | BNC(Q9) |
DO with Temp. Probe | 4-pin aviation connector | |
Conductivity with Temp. Probe | 5-pin aviation connector | |
Outputs | USB | PC |
RS 232 | printer | |
Display options | Backlight | Yes |
Auto Shutdown | 1~60 min, off | |
IP Rating | IP54 | |
Date and Time | Yes | |
General | Power | AC Adapter, 100-240V AC input, DC9V output |
Dimensions | 242×195×68 mm | |
Weight | 900g (1.98 lb) | |
Dimensions (Carton) | 370×305×330 mm | |
Weight (Gross) | 3.5 kg |
Features:
GENERAL FEATURES
· High resolution LCD display, 5.7 inches.
· Multi-reading feature allows auto-read, timed-read and continuous-read.
· Automatic/Manual temperature compensation ensures accurate results.
· Auto-hold feature senses and locks the measurement endpoint.
· Data Storage 500 sets (GLP-compliant).
· Support for USB or RS-232 communication.
· Reset feature automatically resumes all settings back to factory default options.
· IP54 waterproof.
pH
· 1-5 points calibration with Standard Recognition.
· Selectable pH buffer groups, including NIST, DIN, GB.
· Automatic electrode diagnosis with pH slope and offset display.
Ion
· 1-5 points calibration.
· Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, PX, etc.
· Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode.
· Over 10 methods are built-in, including F-, Cl-, Br-, I-, NO3-, BF4-, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+ and etc., user-defined method is supported.
Conductivity
· 1-3 points calibration with Standard Recognition.
· Settable parameters, including cell constant, temperature compensation coefficient and TDS factor.
· Temperature compensation type (none, linear, pure water).
DO
· Support for air-saturated water or zero oxygen calibration.
· Auto barometric pressure compensation
· Manual Salinity Factor Correction
· Selectable pressure unit, including kPa, mbar, Torr, Atm.
Includes
· E-301-QC 3 in 1 pH composite electrode
· DJS-1VTC EC electrode
· DO-958-Q polarographic DO electrode
· NIST pH standard solution(4.01, 7.00, 10.01) ,50ml/vial
· 1413μS/cm EC standard solution, 50ml, 1 vial
· REX-5 electrode stand
Specifications:
Model | M300F | |
Parameters | pH/EC/ISE/DO/Temp. (mV/ORP/pX/Resistivity/TDS/Sal./DO Saturation) | |
pH | Range | -2.00 to 20.00pH |
Resolution | 0.1, 0.01 pH | |
Accuracy | ±0.01 pH | |
Calibration Points | Up to 5 | |
Standard Customization | Yes | |
Standard Recognition | NIST, GB, USA and DIN buffers | |
Slope Limit | Yes | |
mV | Range | -2000.0 to 2000.0 mV |
Resolution | 0.1 mV | |
Accuracy | ±0.3 mV or ±0.1% | |
pX | Range | -2.00 to 20.00 pX |
Resolution | 0.1, 0.01 pX | |
Accuracy | ±0.01 pX | |
Calibration Points | Up to 5 | |
ISE | Range | 1.000e-9 to 9.999e+9 |
Unit | mol/L, mmol/L, g/L, mg/L, μg/L, ppm, ppb | |
Resolution | Up to 4 significant digits | |
Accuracy | ±0.5% | |
Calibration Points | Up to 5 | |
Conductivity | Range | 0.000 μS/cm to 1000 mS/cm |
Resolution | 0.001 μS/cm minimum, various with range selection | |
Accuracy | ±1.0% FS | |
Reference Temperature | 20, 25 ºC | |
Calibration Points | Up to 3 | |
Standard Recognition | 84μS/cm, 1413μS/cm, 12.88mS/cm | |
Resistivity | Range | 5.00 Ω·cm~20.00 MΩ·cm |
Resolution | 0.01 Ω·cm minimum | |
Accuracy | ±1.0% FS | |
TDS | Range | 0.00 ppm~300 ppt |
Resolution | 0.01mg/L minimum, various with range selection | |
Accuracy | ±1.0% FS | |
Salinity | Range | 0.0~80.0 ppt |
Resolution | 0.1ppt | |
Accuracy | ±2ppt | |
Dissolved Oxygen Concentration | Range | 0.00 to 20.00 ppm |
Resolution | 0.01 ppm | |
Accuracy | ±0.10 ppm | |
Calibration Points | Air-saturated water or zero point | |
Barometric Compensation | Yes | |
Manual Salinity Factor Correction | Yes | |
Saturation | Range | (0.0 to 200.0)% |
Resolution | 0.1% | |
Accuracy | ±2.0% | |
Temperature | Range | -5 to 110 ºC, 23 to 230 ºF |
Unit | ºC, ºF | |
Resolution | 0.1 | |
Accuracy | ±0.2ºC | |
Measurement | Reading Mode | Auto Read (Fast, Medium, Slow), Timed, Continuous |
Reading Prompts | Reading, Stable, Locked | |
Temp. Compensation | ATC, MTC | |
Data management | Data Storage | 500 results each |
GLP Features | Yes | |
Inputs | pH Electrode | BNC(Q9) |
DO with Temp. Probe | 4-pin aviation connector | |
Conductivity with Temp. Probe | 5-pin aviation connector | |
Outputs | USB | PC |
RS 232 | printer | |
Display options | Backlight | Yes |
Auto Shutdown | 1~60 min, off | |
IP Rating | IP54 | |
Date and Time | Yes | |
General | Power | AC Adapter, 100-240V AC input, DC9V output |
Dimensions | 242×195×68 mm | |
Weight | 900g (1.98 lb) | |
Dimensions (Carton) | 370×305×330 mm | |
Weight (Gross) | 3.5 kg |