Machine parameters
Technical parameter | |||
Rated voltage | AC/V | AC220 | |
Rated frequency | HZ | 50/60 | |
Input power | W | 510 | |
Output power | W | 300 | |
Rated torque | N.cm | 22.1 | |
Working system | min | S1(Continuity) | |
Operation control method | Combined control knob | ||
Speed regulation range -no load | rpm | 0~11000 | |
Speed control type | Infinity | ||
Running dynamic display | LED(digital) | ||
Maximum torque of working head | N.cm | 22 | |
Maximum linear speed of rotor | m/s | 19 | |
Working head material | SS304 Stainless Steel | ||
Working head diameter | mm | 70 | |
Maximum /minimum immersion height | mm | 50/236 | |
Standard configuration of stator | mm2 | 5/20/50 | |
Treatment capacity(H2O) | ml | 500~40000 | |
Maximum processing viscosity | mPa.s | 8000 | |
Allowable ambient temperature | ℃ | No more than 40 | |
Allowable relative humidity | % | No more than 80 | |
Timing control range | min | 1~1000 | |
Machine overall size | mm | 215*310*720 | |
Total weight | kg | 11.5 |
Machine parameters
Technical parameter | |||
Rated voltage | AC/V | AC220 | |
Rated frequency | HZ | 50/60 | |
Input power | W | 510 | |
Output power | W | 300 | |
Rated torque | N.cm | 22.1 | |
Working system | min | S1(Continuity) | |
Operation control method | Combined control knob | ||
Speed regulation range -no load | rpm | 0~11000 | |
Speed control type | Infinity | ||
Running dynamic display | LED(digital) | ||
Maximum torque of working head | N.cm | 22 | |
Maximum linear speed of rotor | m/s | 19 | |
Working head material | SS304 Stainless Steel | ||
Working head diameter | mm | 70 | |
Maximum /minimum immersion height | mm | 50/236 | |
Standard configuration of stator | mm2 | 5/20/50 | |
Treatment capacity(H2O) | ml | 500~40000 | |
Maximum processing viscosity | mPa.s | 8000 | |
Allowable ambient temperature | ℃ | No more than 40 | |
Allowable relative humidity | % | No more than 80 | |
Timing control range | min | 1~1000 | |
Machine overall size | mm | 215*310*720 | |
Total weight | kg | 11.5 |