Features:
1. Oil-resistant and water-resistant
2. No danger
3. Accuracy: +/- 1°C below 100°C; +/- 1% of range above 100°C
4. Product specifications comply with BS ENISO9001 standard
Product use
Users should correctly understand the use of temperature measuring paper. Removing the temperature measuring paper requires some skills. First bend the bottom paper and then remove it. If you are not skilled in removing it, please use a knife to shovel along the bottom paper from the side. Do not pick it randomly to avoid damage. The temperature measurement part attached should be relatively flat, clean and dry, without bubbles. Use sandpaper to polish to remove the oxide layer and uneven surfaces, or clean and wipe it with gasoline and other solvents. There is pressure-sensitive adhesive attached to the temperature measuring paper. When pasting, you must apply pressure with your hands to ensure that the tiny air gaps between the adhesive surfaces are eliminated, so that the adhesive surface can exert its bonding effect under pressure, so that it can be adhered firmly and firmly. When attaching it to areas that may be exposed to oil or water, please pay attention to cleaning the surface. In places with particularly harsh environments, wrapping a larger piece of transparent tape can provide better protection and fixation. If necessary, it can also be pasted with electricity. First, stick the patch to the insulating rod with a small tip, and push the glued side towards the device, so that it can be easily stuck on the device. Note that it is forbidden to touch it with hands during the temperature measurement process to prevent damage to the product.
Product Code | Specification | Packing` |
W-013401 | Type A 40-71°C | 10 items/book |
W-013402 | Type B77-127°C | 10 items/book |
W-013403 | Type C132-182°C | 10 items/book |
W-013404 | Type D188-249°C | 10 items/book |
Features:
1. Oil-resistant and water-resistant
2. No danger
3. Accuracy: +/- 1°C below 100°C; +/- 1% of range above 100°C
4. Product specifications comply with BS ENISO9001 standard
Product use
Users should correctly understand the use of temperature measuring paper. Removing the temperature measuring paper requires some skills. First bend the bottom paper and then remove it. If you are not skilled in removing it, please use a knife to shovel along the bottom paper from the side. Do not pick it randomly to avoid damage. The temperature measurement part attached should be relatively flat, clean and dry, without bubbles. Use sandpaper to polish to remove the oxide layer and uneven surfaces, or clean and wipe it with gasoline and other solvents. There is pressure-sensitive adhesive attached to the temperature measuring paper. When pasting, you must apply pressure with your hands to ensure that the tiny air gaps between the adhesive surfaces are eliminated, so that the adhesive surface can exert its bonding effect under pressure, so that it can be adhered firmly and firmly. When attaching it to areas that may be exposed to oil or water, please pay attention to cleaning the surface. In places with particularly harsh environments, wrapping a larger piece of transparent tape can provide better protection and fixation. If necessary, it can also be pasted with electricity. First, stick the patch to the insulating rod with a small tip, and push the glued side towards the device, so that it can be easily stuck on the device. Note that it is forbidden to touch it with hands during the temperature measurement process to prevent damage to the product.
Product Code | Specification | Packing` |
W-013401 | Type A 40-71°C | 10 items/book |
W-013402 | Type B77-127°C | 10 items/book |
W-013403 | Type C132-182°C | 10 items/book |
W-013404 | Type D188-249°C | 10 items/book |